Possess Sea Industrial Co., Ltd. - Personal Protective Equipment
Professional Personal Protective Equipment Supplier and Exporter in China
  • Coronavirus Disease 2019 (COVID-19)
  • Coronavirus Disease 2019 (COVID-19) Prevention
Contact: Ms.Maggie, Mobile / WhatsApp: +86 138 1815 9222, E-mail: maggie@chinamedical.asia

Disposable Medical Protective Gowns

Our disposable medical protective gowns is made of non-woven fabrics, which are cut and sewn. It complies with the China standard GB 19082-2009, and is suitable for use in non-red areas such as clinics, wards, and examination rooms of medical institutions.

  • Disposable Medical Protective Gowns

Disposable Medical Protective Gowns - 01

Material: Polypropylene non-woven spunbond fabric.

Process: Front zipper, elastic cuffs.

Size: S, M, L, XL, XXL, XXXL.

Package: Single individually packaged, 50 sets / carton.

Explain: Non-sterile, single-use, only for general protective use in low-risk areas.

  • Disposable Medical Protective Gowns

Disposable Medical Protective Gowns - 02

Material: PU film composite material (55G).

Process: Front zipper, elastic hood and cuffs.

Size: S, M, L, XL, XXL, XXXL.

Package: Single individually packaged, 50 sets / carton.

Explain: Non-sterile, single-use, only for general protective use in low-risk areas.

  • Disposable Medical Protective Gowns

Disposable Medical Protective Gowns - 03

Material: SMS non-woven fabric (Spunbond Non-woven Fabric + Meltblown Non-woven Fabric + Spunbond Non-woven Fabric), three-layer hot pressing.

Process: Front zipper, three-piece cap, closed placket, seam line reinforced with tape, elastic cuffs.

Size: S, M, L, XL, XXL, XXXL.

Package: Single individually packaged, 50 sets / carton.

Explain: Non-sterile, single-use. China class I medical standard.

Certification: GB 19082-2009 (Technical Requirements for Disposable Medical Protective Clothing).

GB 19082-2009 (Technical Requirements for Disposable Medical Protective Gowns):

Type Claim
Impermeability The hydrostatic pressure of key parts of the protective gowns should not be lower than1.67kPa (17cm H2O).
Moisture Permeability The moisture permeability of protective gowns materials shall not be less than2500g / (m2·d).
Resistance to Synthetic Blood Penetration The protective gowns's penetration resistance against synthetic blood should not be lower than1.75kPa.
Surface Moisture Resistance The level of water on the outer side of the protective gowns should not be lower than the level 3 requirements in GB / T4745-1997.
Breaking Strength The breaking strength of the key parts of the protective gowns should not be less than 45N.
Elongation at Break The elongation at break of the key parts of the protective gowns is not less than 15%.
Filtration Efficiency The filtering efficiency of non-oily particles at the key parts of the protective gowns and the joints should not be less than 70%.
Flame Retardant Performance Protective gowns with flame retardant properties shall meet the following requirements:
a: The damage length is not more than 200mm.
b: Afterflame time does not exceed 15s.
c: Smoldering time does not exceed 10s.
Antistatic The charge of protective gowns should not be greater than 0.6uC.
Static Decay Performance The static decay time of the protective gowns material should not exceed 0.5s.
Skin Irritation The primary stimulus score should not exceed 1.
Microbial Index Protective gowns should meet the requirements of microbial indicators in GB 15979-2002, see the table below.
Protective gowns marked "Sterilized" or "Sterile" on the packaging or illustrated should be sterile.
Ethylene Oxide Residue Ethylene oxide sterilized protective gowns should have an ethylene oxide residue of no more than 10ug / g.
Microbiological Indicators of Protective Gowns
Total Bacterial Colonies Coliform Pseudomonas Aeruginosa Staphylococcus Aureus Hemolytic Streptococcus Total Number of Fungal Colonies
≤200 CFU/g Cannot be Checked Out Cannot be Checked Out Cannot be Checked Out Cannot be Checked Out ≤100 CFU/g